配置telnet登陆及特权模式密码
分类:网络技术日期:2010-11-24 - 21:57:56评论:0条作者:老谢
实验目的:配置pc telnet登陆交换机及特权模式的密码
配置过程如下
| Switch>en Switch#conf terminal Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#int vlan 1 Switch(config-if)#ip add 192.168.1.1 255.255.255.0 Switch(config-if)#no shutdown %LINK-5-CHANGED: Interface Vlan1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up Switch(config-if)#exit Switch(config)#enable password 123456 Switch(config)#line vty 0 4 Switch(config-line)#password xj123 Switch(config-line)#login Switch(config-line)#end | 



最新评论
秦大叔:现在都是够用就好,不想太折腾了。
Andy烧麦:X1C 5th 2017年-2022年,走南闯北...
王叨叨:自从换了typecho,博客也不怎么出问...
王叨叨:我准备给我的老笔记本搞一个linux系...
大D:台式机现在只能是AMD YES!
springwood:查询了一下,ThinkPad x1c 9th ...
黑石:特斯拉和小米,选哪个?不是很懂车,就...
Huo:电车的确开着舒服,也是纠结想换电车,...
zwwooooo:类似以前做网站开发时,一开始有自...
老陳网志:有点高端,像我们整点nas玩玩就够...